| Tempat asal: | Cina |
| Nama merek: | SURPLUS LIGHTING |
| Sertifikasi: | TUV CB CE RoHS SAA UKCA |
| Nomor model: | SL-ST50B2 |
| Kuantitas min Order: | 1 UNIT |
|---|---|
| Harga: | 1-100US$/unit |
| Kemasan rincian: | Kemasan Standar atau Disesuaikan |
| Waktu pengiriman: | 10-18 hari kerja |
| Syarat-syarat pembayaran: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Menyediakan kemampuan: | 9.000 unit per bulan |
| Seumur hidup: | 120.000 jam (laporan TM21) | LED Brand: | Guangyou 5050 / Lumiled LUXEON 5050 |
|---|---|---|---|
| Jaminan: | 5 tahun sebagai standar | Lumens: | 220lm/W (laporan LM79) |
| Peringkat IP: | IP66 | peringkat IK: | IK08 |
| CCt: | 1700-6500K / PC Amber | baterai: | LiFePO4 12,8V |
| Nilai daya: | 50W | Jenis: | Semua Dalam Satu Lampu Jalan Tenaga Surya Terintegrasi |
| Waktu Pembuangan: | 36~40 jam | Fungsi: | Sensor PIR dan kontrol cahaya |
| Menyoroti: | 50W solar street light,IP66 solar LED light,TUV certified solar lighting |
||
All in One Solar Street Light 50W IP66 Integrated Solar LED Street Light TUV CB CE SAA Certified Solar Lighting 5 Years Warranty
![]()
![]()
SHINING-STAR GEN2 Series 220lm/W 50W IP66 IK08 Integrated Solar LED Street Light 5 Years Warranty All in One Solar Light
| Part No. | SL-ST30B2 | SL-ST40B2 | SL-ST50B2 | SL-ST60B2 | SL-ST80B2 |
| Solar Panel Parameters | Monocrystalline 18V 40W | Monocrystalline 18V 50W |
Monocrystalline 18V 66W
|
Monocrystalline 18V 80W
|
Monocrystalline 18V 100W
|
| Battery Parameters | LiFePO4 12.8V 18AH | LiFePO4 12.8V 24AH | LiFePO4 12.8V 30AH | LiFePO4 12.8V 36AH | LiFePO4 12.8V 42AH |
| System Voltage | 12V | ||||
| LED Brand | Lumileds 5050 / TYF5050 | ||||
| Light Distribution | TYPE II Medium 70°x165° | ||||
| CCT | 1700K~6500K/ PC AMBER / 1700K<1% blue | ||||
| Charge Time | 6 hours | ||||
| Working Time | 3-4 Days (Auto Control) | ||||
| Protection Grade | IP66(TUV IP66 report), IK08 | ||||
| Luminous Efficiency | 220 lm/W (LM79 report) | ||||
| Operating Temperature | -20℃ to 60℃ | ||||
| Warranty | 5 Years | ||||
| Main Materials | ADC12 Die-cast housing, optical PC lens | ||||
| Luminous Flux | 6600 lm | 8800 lm | 11000 lm | 13200 lm | 17600 lm |
| Rated Power | 30W | 40W | 50W | 60W | 80W |
|
Tested |
IEC 62321-1:2013, IEC 62321-2:2021, IEC 62321-3-1:2013, IEC 62321-5:2013, IEC 62321-4:2013+AMD1:2017 CSV, IEC 62321-6:2015, IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-8:2017 |
||||
Maintenance of SHINING-STAR GEN2 series 220LM/W IP66 Integrated Solar LED Street Light 5 Years Warranty
Trouble shooting for SHINING-STAR GEN2 series IP66 IK08 Integrated Solar LED Street Light 5 Years Warranty
| Phenomenon | Cause | Inspection methods | Solution |
|
Lights not work |
Switch does not turn on | Check whether the switch turns on | Turn on the switch |
| Switch failure | Make the switch short circuit, if it is still lighting up, could judge the switch failure. | Replace Switch | |
| Battery runs out | Long rainy day or wrong installation site could not charge enough power. Open the system, disconnect the battery and use multimeter to check the voltage of the battery, if voltage less than 11V, then could judge battery runs out or low power cause system could not work. | Charge battery by solar panel in daytime, and turn off the switch at night to stop discharge, like this, 2 days could full charge the battery. | |
| LED Failure | Firstly, adjust the DC power supply to voltage 9V and current less than 1A, then connect the positive and negative electrode of DC power supply to LED, if LED could not light, could judge LED failure. | If confirming LED failure, please contact us to return and replace. | |
|
Short lighting time |
Low battery |
Wrong installation or dust and leaves cover on solar panel cause not enough solor power to battery. 1. Check whether there is dust or leaves covering on the solar panel. 2. Open the system, disconnect the battery and use multimeter to check the voltage of the battery, if voltage less than 11V, that could judge battery runs out or low power cause system could not work. |
1. Charge battery by solar panel in daytime, and turn off the switch at night to stop discharge, like this, 2 days could full charge the battery. 2. Clean the solar panel. |
| Battery Failure |
Open the light and check if battery is dispalced or outer has been damaged . Battery maturing, lights used more than 2 years. |
1. If damage caused by transportation, please return to our factory for repairing or replacement. 2. Contact us to buy the same type battery if battery maturing. |
|
| No induct | Sensor Failure | Move in the range of detection under the half power lighting condition, if light not turns to full power ,could judge the sensor failure. | If confirming failure caused by controller or sensor, please return to our factory for repairing or replacement. |
| Flashing light | Controller (timer) setting wrong | Intelligent mode opens due to an exceeding output power of the controller and light flashing. | Return to our factory to reset or replace the products. |
![]()
![]()
CB CE RoHS Disetujui Modular IP66 IK10 250W Lampu Jalan LED
ARIES IP66 IK08 150LM/W 30W-240W Lampu Jalan LED INMETRO SAA CB CE Disetujui